Mode | KYRO-10TPH |
Power | Around 19.0KW |
Voltage | 380V/3ph/50Hz (customize available) |
Desalination rate | > 97% |
Recovery rate | 50%-75% |
Material | FRP, Stainless Steel , U-PVC |
Configurations | CNP pump&USA DOW membrane |
Certification | CE & ISO & SGS |
Some parts function
1. Raw water pump: provide needed pressure for every pre-treatment filter;
2. Quartz sand filter: use fiber glass as housing, fill quartz sand, it can filter big particles impurities, suspended substances, colloids etc. Important to remove iron and sediments you mentioned;^^
3. Activated carbon filter: use fiber glass as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances;
4. Security filter: prevent large particles, bacteria, viruses into RO membrane, accuracy is 5µm;
5. High pressure pump: provide needed working pressure for RO system, ensure production capacity of pure water;
6. RO system: can remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source etc. harmful substances and 99% dissolved salts.
Functions:
1. High operation automation degree.
1) Automatic stopping in case of sufficient water under low pressure
a) Protection of hydraulic fluctuation resistance
b) Timed flushing of front filtering materials by automatic controller
c) Automatic flushing of reverse osmosis film by IC microcomputer controller
d) Automatic monitoring of water quality
2. Small landing area, low energy consumption, free of pollution, simple process, high water quality and easy operation and maintenance
3. High removing rate, above 97% for dissolved salts, above 98% for organic substances, and above98% for colloids, bacteria and heat sources etc.
Application
Electronic industry | Pre-filter for ultra pure water, chemical products and pure water |
Food & beverage industry | filter for mineral water, wines and fruit juice, bottled drinking water |
Medicine industry | filter for drug liquid |
Chemical industry | filter for organic solvent |
Petroleum industry | filter for oil-field flooding |
Technical Flowchart of Reverse Osmosis Plant
Untreated water feed pump →Quartz sand filtration→ Active carbon filtration → Precise filtration → Softener→ High pressure pump →RO Membrane system→ CIP system → PLC system → Post Treatment (UV disinfection)
Some parts function
1. Raw water pump: provide needed pressure for every pre-treatment filter; |
2. Quartz sand filter: use fiber glass as housing, fill quartz sand, it can filter big particles impurities, suspended substances, colloids etc. Important to remove iron and sediments you mentioned;^^ |
3. Activated carbon filter: use fiber glass as housing, fill activated carbon, remove color, odor, residual chlorine and organics substances; |
4. Security filter: prevent large particles, bacteria, viruses into RO membrane, accuracy is 5µm; |
5. High pressure pump: provide needed working pressure for RO system, ensure production capacity of pure water; |
6. RO system: can remove particles, colloids, organic impurities, heavy metal ions, bacteria, virus, heat source etc. harmful substances and 99% dissolved salts. |
7. UV Sterilizer(for direct drinking): kill bacteria , viruses , cell damage , atc... |
